Product ID:305 SUPREME FORMULA ENGINE OIL
MSDS Date:03/24/1992
FSC:9150
NIIN:01-345-6154
MSDS Number: BTHQK

SOUTHWESTERN PETROLEUM CORP

534 N MAIN STREET
FORT WORTH, TX 76106
US

Emergency Phone: 817-332-2336/800-424-9300(CHEMTREC)

Info Phone: 817-332-2336

Cage: 14392

SOUTHWESTERN PETROLEUM CORP

961005 FORT WORTH, TX 76106 US

Telephone: 817-348-7235

Cage: 14392

RESIDUAL OILS, HYDROTREATED

CAS: 64742-57-0

Fraction By Weight: SEE #7%

OSHA PEL 5 MG/M3 (OIL MIST)

ACGIH TLV: 5 MG/M3 (OIL MIST)

DISTILLATES, HYDROTREATED HEAVY PARAFFINIC

CAS: 64742-54-7

RTECS: PY8035500

Fraction By Weight: SEE #7%

OSHA PEL 300 PPM

ACGIH TLV: 300 PPM

SOLVENT REFINED, HYDROTREATED LIGHT PARAFFINIC DISTILLATE

CAS: 64742-55-8

RTECS: PY8036500

Fraction By Weight: SEE #7%

REFINED HEAVY PARAFFINIC DISTILLATES

CAS: 64741-88-4

Fraction By Weight: SEE #7%

OSHA PEL 5 MG/M3 (OIL MIST)

ACGIH TLV: 5 MG/M3 (OIL MIST)

SOLVENT, DEWAXED RESIDUAL OIL (PETROLEUM)

CAS: 64742-62-7

Fraction By Weight: SEE #7%

OSHA PEL 5 MG/M3 AS OIL MIST

ACGIH TLV: 5 MG/M3 AS OIL MIST

DISTILLATES, SOLVENT-DEWAXED LIGHT PARAFFINIC

CAS: 64742-56-9

RTECS: PY8039500

Fraction By Weight: SEE #7%

OSHA PEL 300 PPM

ACGIH TLV: 300 PPM

TOTAL OF INGREDIENTS #1-6

RTECS: 9999999ZZ

Fraction By Weight: >94%

ZINC ALKYLDITHIOPHOSPHATE (PHOSPORODITHIOIC ACID, ZINC

CAS: 68649-42-3

Fraction By Weight: <2%

LD50 LC50 Mixture:NOT KNOWN
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:NOT EXPECTED TO PRESENT A
SIGNIFICANT HEALTH HAZ UPON SHORT TERM EXPOSRUE. INHAL:NORMALLY
NOT A PROBLEM UNDER AMBIENT CONDITION. EYE:IRRIT. INGEST:MINUTE
AMTS ASPIRATED INTO LUNGS DURING INGEST MAY CAUSE MILD-SEVERE PULM
INJURY & POSSIBLY DEATH. CHRONIC:PROLONGED/REPEATED SKIN CONTACT
CAUSES MILD IRRIT & INFLAMM
Effects of Overexposure:EYE:REDNESS, PAIN. INGEST:ASPIRATION MAY
RESULT--SHORTNESS OF BREATHING, WHEEZING. SKIN:REDNESS, DISCOMFORT,
INFLAMMATION.
Medical Cond Aggravated by Exposure:PERSONNEL WITH PRE-EXISTING SKIN
DISORDERS SHOULD AVOID CONTACT WITH THIS PRODUCT.

First Aid:INHAL:REMOVE TO FRESH AIR. IF BREATH DIFFI PERSIST GET MED
ATTN. EYE:FLUSH W/WATER FOR 15MINS. IF PAIN OR REDNESS PERSIST GET
MED ATTN. SKIN:WASH W/SOAP & WATER AFATER WIPING OFF EXCESS MATL.
DO NOT I NDUCE VOMIT. CALL DOCTOR IMMED.

Flash Point Method:COC
Flash Point:>354F,>179C
Lower Limits:0.9
Upper Limits:7
Extinguishing Media:USE WATER SPRAY, DRY CHEMICAL, FOAM, OR CARBON
DIOXIDE.
Fire Fighting Procedures:USE WATER TO KEEP FIRE-EXPOSED CONTAINER
COOLED. WATER SPRAY MAY BE USED TO FLUSH SPILLS AWAY FROM
EXPOSURES. USE SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:WATER OR FOAM MA CAUSE FROTHING. HYDROGEN
SULFIDE MAY BE PRODUCED ABOVE 121C.

Spill Release Procedures:USE INERT ABSORBENT MATERIAL TO CONFINE SPILLS
AND TO ABSORB MATERIAL. SCOOP INTO A DISPOSABLE CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID HIGH TEMPERATURES AND IGNITION
SOURCES. AVOID BREATHING VAPORS/MIST.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:ADEQUATE VENTILATION OR NIOSH/MSHA APPROVED
RESPIRATORS TO MEET EXPOSURE LIMITS.
Ventilation:ADEQUATE VENTILATION TO MEET EXPOSURE LIMITS.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:GOGGLES OR FACE SHIELD.
Other Protective Equipment:PROTECTIVE CLOHTING. PER MFG'S MSDS NO
APPLICABLE INFORMATION FOUND.
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER HANDLING MATERIAL &
PRIOR TO EAT/DRINK/SMOKE.
Supplemental Safety and Health
PER CTDF:PN (SOUTHWESTERN PETRO CORP)=DIMONYL FRICTION FILM OIL 306
GRADE SAE 30.

HCC:V6
Boiling Pt:B.P. Text:>559F,>293C
Vapor Density:>5
Spec Gravity:0.9
Solubility in Water:INSOLUBLE
Appearance and Odor:PURPLE COLOR WITH A LUBE OIL ODOR.
Percent Volatiles by Volume:NONE

Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS (AS RELATED TO GENERAL ORGANIC MATERIALS).
Stability Condition to Avoid:TEMPERATURES ABOVE 121C AND IGNITION
SOURCES.
Hazardous Decomposition Products:HYDROGEN SULFIDE MAY BE PRODUCED ABOVE
121C.

Waste Disposal Methods:LAND FILL OR INCINERATE AS LOCAL, STATE AND
FEDERAL REGULATIONS PERMIT.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.